문서 보기이전 판역링크맨 위로 이 문서는 읽기 전용입니다. 원본을 볼 수는 있지만 바꿀 수는 없습니다. 문제가 있다고 생각하면 관리자에게 문의하세요. ===== Stamp hole design ===== {{:development:hardware:design:pasted:20171115-004701.png}} * The recommended width of milling grooves is 2mm. Milling grooves are often used in situations where a certain distance must be maintained between individual boards on a panel. It is generally used together with V-CUT scoring and stamp holes. * The distance between the origins of adjacent stamp holes should be 1.5mm. Recommended distance between the two groups of stamp hole is 5mm, as shown in picture 5. CKG Edit development/hardware/design/stamp_hole.txt 마지막으로 수정됨: 2020/09/25 10:12저자 127.0.0.1