차이
문서의 선택한 두 판 사이의 차이를 보여줍니다.
| 다음 판 | 이전 판 | ||
| development:hardware:design:stamp_hole [2017/11/15 00:15] – 만듦 kim7463 | development:hardware:design:stamp_hole [2020/09/25 10:12] (현재) – 바깥 편집 127.0.0.1 | ||
|---|---|---|---|
| 줄 1: | 줄 1: | ||
| ===== Stamp hole design ===== | ===== Stamp hole design ===== | ||
| + | {{: | ||
| + | * The recommended width of milling grooves is 2mm. Milling grooves are often used in situations where a certain distance must be maintained between individual boards on a panel. It is generally used together with V-CUT scoring and stamp holes. | ||
| + | * The distance between the origins of adjacent stamp holes should be 1.5mm. Recommended distance between the two groups of stamp hole is 5mm, as shown in picture 5. | ||